Sun Inverter

SKU principal: SIN121251100

Sun Inverter

The Sun Inverter combines a sinewave inverter and a PWM solar charger in one enclosure and is easy to install,
with a minimum of wiring.<o:p></o:p> The inverter allows you to power domestic equipment - requiring 230V AC - using 'leisure' or 'automotive' batteries rated at 12V or 24V. The solar charger ensures that the batteries are being charged by energy harvested from your solar panels. The charge algorithm is programmable. The inverter and solar charger parameters can be read out via Bluetooth using the VictronConnect app. In addition to this,
the inverter has a VE.Direct Port for connection to a GX device or GlobalLink 520 for system monitoring.

Códigos SKU

SIN121251100 SIN241251100

DATOS DEL FABRICANTE

Especificaciones técnicas

Battery Voltage Nominal: 24 V
Cont Power W25: 200 W
Cont Power W40: 175 W
Peak Power Rating: 400 W
A C Output Voltage: 230 V
Frequency Select: 50Hz or 60Hz
D C Input Voltage Range: [ 18.4, 34 ] V
D C Low Shut Down: 18.6 V
D C Low Restart Alarm: 21.8 V
Dynamic Low D C Shutdown: 1
Battery Charged Detection Voltage: 28 V
Max Efficiency: 88 %
Zero Load Power: 5.2 W
Zero Load Power Eco Mode: 1.3 W
Includes P W M: 1
Solar Technology: Pulse With Modulation (PWM)
Solar Panel Type: Solar panel with 72 cells, Two solar panles with 36 cells in series
Charge Voltages: Adjustable and able to be temperature compensated
Temperature Sensor: Optional (Smart Battery Sense)
Protections: Output short-circuit, Overload, High battery voltage, Low battery voltage, Over temperature, Excessive DC ripple
Bluetooth: Yes
Remote On Off Terminal: 1
Communication Port: Bluetooth, VE.Direct
Fully Programable: 1
Operating Temp Range: [ -40, 60 ] °C
Power Deration: 1.25 %/°C
Max Humidity: 95 %
A C Outlet Socket: IEC-320 (male plug included)
Battery Connection Terminal Type: Screw terminals 10 mm² (8 AWG)
Pv Connection Terminal Type: Screw terminals 4 mm² (12 AWG)
Remote Terminal: Screw terminal two pole
Colour: Blue (RAL 5012)
Material: Steel chassis and plastic cover
Protection Category: IP21
Weight: 2.4 kg
Height: 86 mm
Width: 165 mm
Depth: 260 mm
Safety: EN-IEC 60335-1, EN-IEC 62109-1
E M C: EN 55014-1, EN 55014-2, EN-IEC 61000-6-1, EN-IEC 61000-6-2, EN-IEC 61000-6-3
Automotive Directive: ECE R10-4, EN 50498
Battery Voltage Nominal: 12 V
Cont Power W25: 200 W
Cont Power W40: 175 W
Peak Power Rating: 400 W
A C Output Voltage: 230 V
Frequency Select: 50Hz or 60Hz
D C Input Voltage Range: [ 9.2, 17 ] V
D C Low Shut Down: 9.3 V
D C Low Restart Alarm: 10.9 V
Dynamic Low D C Shutdown: 1
Battery Charged Detection Voltage: 14 V
Max Efficiency: 87 %
Zero Load Power: 4.2 W
Zero Load Power Eco Mode: 0.8 W
Includes P W M: 1
Solar Technology: Pulse With Modulation (PWM)
Solar Panel Type: Solar panel with 36 cells
Charge Voltages: Adjustable and able to be temperature compensated
Temperature Sensor: Optional (Smart Battery Sense)
Protections: Output short-circuit, Overload, High battery voltage, Low battery voltage, Over temperature, Excessive DC ripple
Bluetooth: Yes
Remote On Off Terminal: 1
Communication Port: Bluetooth, VE.Direct
Fully Programable: 1
Operating Temp Range: [ -40, 60 ] °C
Power Deration: 1.25 %/°C
Max Humidity: 95 %
A C Outlet Socket: IEC-320 (male plug included)
Battery Connection Terminal Type: Screw terminals 10 mm² (8 AWG)
Pv Connection Terminal Type: Screw terminals 4 mm² (12 AWG)
Remote Terminal: Screw terminal two pole
Colour: Blue (RAL 5012)
Material: Steel chassis and plastic cover
Protection Category: IP21
Weight: 2.4 kg
Height: 86 mm
Width: 165 mm
Depth: 260 mm
Safety: EN-IEC 60335-1, EN-IEC 62109-1
E M C: EN 55014-1, EN 55014-2, EN-IEC 61000-6-1, EN-IEC 61000-6-3
Automotive Directive: ECE R10-4, EN 50498

← Volver a productos Victron