VE.Bus BMS / VE.Bus BMS V2

<p class="MsoNormal">The VE.Bus BMS V2 is a Battery Management System (BMS) designed to interface with and protect a single,
or multiple Victron Lithium Battery Smart 12,
8V & 25,
6V (LiFePO4 or LFP) in systems that have Victron inverters or inverter/chargers with VE.Bus communication. It monitors and protects the batteries against over voltage and under voltage of any individual cell,
and also over temperature or under temperature conditions.</p><p class="MsoNormal">Based on the status of the battery or batteries,
the BMS will:<br></p><ul><li>Generate a pre-alarm signal to alert of an imminent cell under voltage condition.</li><li>Disable inverting in VE.Bus inverters or inverter/chargers via VE.Bus,
and disable other loads via the 'Load Disconnect' terminal in the event of a cell under voltage condition.</li><li>Disable charging in VE.Bus inverters or inverter/chargers via VE.Bus and disable other chargers via the 'Charge Disconnect' terminal in the event of a cell overvoltage,
under temperature or over temperature condition.</li><li>Remote on/off terminals.</li><li>Ability to disable VE.Direct and VE.Can solar chargers via a GX device.</li><li>Allowing control of the VE.Bus inverter/charger from multiple devices,
like the Digital Multi Control,
the VE.Bus Smart dongle and/or a GX device.</li><li>Auxiliary power input and output terminals that allow a GX device to remain powered in the event of a system shutdown.</li></ul><div><br></div>